Dimplex DF2600 Bedienungshandbuch PDF herunterladen (Seite 9)

9

Figure 4

Operation

The controls are located on

the upper right of the replace.

(Figure 4)

A. 3-Position Switch

The switch has two ON positions

marked with " I " and " II " .

The " I " position is for manual

operation. In this position the

built-in remote control is by-

passed.

The " II " position is for operating

the unit with the provided remote

control.

When in the " II " position the unit

is operated with the ON and OFF

buttons of the remote control.

When the switch is in the center

position the unit is off.

B. Heater ON/OFF Switch

The Heater ON/OFF Switch

supplies power to the heater

fan and the heater element.

When the switch is in the ON

position the heater operates if the

thermostat calls for heat.

!

NOTE: The fan will continue

running even when the heater is

not, when the Heater Switch is in

the ON position.

C. Heater Thermostat Control

To adjust the temperature to

your individual requirements,

turn the thermostat control

clockwise all the way to turn

on the heater. When the room

reaches the desired temperature,

turn the thermostat knob counter

clockwise until you hear a click.

Leave in this position to maintain

the room temperature at this

setting. For additional heat, turn

clockwise until you hear the click

again and the heater will turn on.

Resetting The

Temperature Cutoff

Switch

Should the heater overheat, an

automatic cut out will turn the

heater off and it will not come

back on without being reset.

It can be reset by switching

the 3-Position Switch to OFF

and waiting 5 minutes before

switching the unit back on.

CAUTION: If you need to

A

B

C

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare