Dimplex CFA36BS Wartungshandbuch PDF herunterladen (Seite 9)

SWITCH

ON/OFF

To decrease risk of electric shock, remove wrist •

watches and jewelry such as rings and bracelets when

replacing battery.

To decrease risk of electric shock, only use tools with •

insulated handles.

To prevent damage to the electric replace and to •

prevent bodily harm, only replace battery with Dimplex

replacement rechargeable batteries.

To prevent damage to the electric replace and to •

prevent bodily harm, only use Dimplex approved DC

power supply to power and recharge battery.

To dispose of spent battery, return it to place of •

replace purchase, deliver it to a local recycling facility

or ship it to Dimplex North America Limited in the

replacement battery packaging material.

Ensure the replace is turned OFF.1.

Unplug the Power Supply cord from the unit (if at-2.

tached).

Carefully remove the River Rocks (media) from the 3.

Media Tray on the front of the replace

Lift and remove the electric replace from the wall-4.

mounting bracket (Figure 2) and carefully place it

upright on a at surface.

CAUTION: A protective barrier (i.e. blanket) between

the replace and work surface will help prevent scratches

on the work surface or the replace.

On the back of the replace, remove the eight (8) 5.

screws securing the battery cover to the unit, located in

the bottom, right corner of the back panel (Figure 3).

Lift and remove the battery access cover.6.

Tilt the unit backwards, to allow the battery to slide out 7.

of the opening.

NOTE: The battery is heavy so ensure that it will slide

out onto the at surface.

CAUTION: Take care not to damage the 2 wire con-

nections on the left side of the battery. (Figure 3)

Once battery is out of the opening, remove the two (2) 8.

wire lead connectors from the battery terminals taking

note of their original conguration.

NOTE: These wire connectors can be carefully re-

moved one at a time by using needle nosed pliers.

Set the Battery aside.9.

Remove the remainder of the 17 screws which secure 10.

the back panel on to the replace. 3 along the top; 3

along the right (battery side); 5 along the left (switch

side); and 6 on the bottom lip of the back panel.

Lift the back panel off the unit, exposing the internal 11.

components and set it aside.

Looking at the unit from behind, locate the ON/OFF 12.

switch on the left side of the bottom panel.

Disconnect the wire lead connectors on the switch 13.

coming from the circuit board noting the original con-

guration. (Figure 5).

NOTE: Using a at head screwdriver gently pry be-

tween the end of the connector and the switch to release

the wires.

NOTE: Try not to reverse the two black wires on the

switch.

Remove the switch from the bottom panel by depress-14.

ing the 4 mounting tabs and pushing the switch out-

ward through the bottom panel of the replace.

NOTE: Pliers or a at head screw driver may be help-

ful in getting a better grasp or putting more pressure on the

tabs to release them.

Push the new switch into place through the bottom 15.

panel according to the original position.

Re-connect the wire connectors from the board. (Figure 16.

Re-assemble the remainder of the replace in reverse 17.

order.

18. NOTE: Before placing the battery back in the

housing/brackets, ensure that the battery wire leads are

re-connected in their original position with black leading

to black and red leading to red to ensure correct polar-

ity and that they are not pinched when replacing the

access cover.

CIRCUIT BOARD REPLACEMENT / LED

DRIVER PCB CIRCUIT BOARD

Tools Required: Phillips Screw Driver;

Flat Head Screw Driver

Needle Nosed Pliers

WARNING: Unplug or disconnect power before attempt-

ing any maintenance to reduce the risk of electric shock or

damage to persons.

Ensure the replace is turned OFF.1.

Unplug the Power Supply cord from the unit (if at-2.

tached).

Carefully remove the River Rocks (media) from the 3.

Media Tray on the front of the replace

Lift and remove the electric replace from the wall-4.

Figure 5

1 2 3 4 5 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare

Dimplex CFA36BS Wartungshandbuch Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamine Dimplex CFA36BS