Dimplex BF392SD Bedienungsanleitung PDF herunterladen

INSTALLATION GUIDE FOR THE ELECTRIC FIREPLACE

LISTINGS AND CODE APPROVALS

The BF series fireplaces have been tested in accordance with the UL 2021and CSA C22.2 No.

46 standards for fixed and location-dedicated electric room heaters.

MODEL SPECIFICATIONS

Model Number Description Voltage Volts

Rated Power Watts

Remote

Control

AMPS

120Volt

BF392SD 39” two sided 120 1500 STANDARD 12.5

NOTE: Power ratings shown include the light bulbs and motor

STEP-BY-STEP INSTALLATION (Note: Please read all instructions before installing)

1. Rough in framing opening following the recommended dimensions (Section A:

Framing).

NOTE

Section A: Rough-in framing dimensions are based on ½” thick drywall. Rough-in framing

dimensions will vary for different drywall thicknesses.

2. Allow 8” of service cable for connecting to the junction box on the fireplace. Remove

the outer jacket and strip the individual conductors ½” from the end.

3. Loosen the screw securing junction box cover and remove the cover (FIGURE 1).

4. Remove knockouts if necessary or use the provided cable clamp.

5. Place unit in position in the opening, level with shims if necessary and attach unit to

frame using nailing flanges provided.

6. Unit is factory wired for 120 volt installation. Wires L1, N & G are attached to the rear of

the junction box cable clamp for easy access.

7. Wire a dedicated, 15 amp fused circuit with three wires (L1, N &G) rated for 120 volts.

8. Place all connectors inside the unit and replace the junction box cover, ensuring that the

cable clamp grips only the jacket of service, thermostat and if applicable wall switch

lines.

WARNING

Ensure method of installation does NOT obscure the air intake slots on bottom front of unit

in any manner.

7205760100REV03

FIGURE 1

Junction Box

Air Intake Slots

1 2 3 4

Inhaltsverzeichnis

Seite 1 - MODEL SPECIFICATIONS

INSTALLATION GUIDE FOR THE ELECTRIC FIREPLACE LISTINGS AND CODE APPROVALS The BF series fireplaces have been tested in accordance with the UL 2021and

Seite 2 - SECTION A: FRAMING

SECTION A: FRAMING Rough-in framing dimensions Firebox dimensions This fireplace is a zero clearance desig

Seite 3 - WIRING DIAGRAM

WIRING DIAGRAM 3

Seite 4 - 1-888-DIMPLEX

1367 Industrial Road Cambridge, Ontario Canada, N1R 7G8 1-888-DIMPLEX1-888-346-7539 Approved for

Kommentare zu diesen Handbüchern

Keine Kommentare

Dimplex BF392SD Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ofen Dimplex BF392SD herunter. Dimplex BF392SD User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ofen Dimplex BF392SD