Dimplex XL6N Bedienungsanleitung PDF herunterladen

XLS6N AUTOMATIC XL6N MANUAL

ULTRA-SLIM STORAGE HEATER

MODELS: XLS6N - 6kWh

XL6N - 6kWh

INSTALLATION AND OPERATING

INSTRUCTIONS

IMPORTANT

PLEASE READ THIS LEAFLET CAREFULLY AND

RETAIN FOR FURTHER USE. NOTE ALSO THE

INFORMATION GIVEN ON THE HEATER

The installation must be carried out by a competent electrician and should be in accordance with I.E.E.

Regulations.

A Double Pole Switch with a contact separation of at least 3mm on each pole must be provided in the

installation.

The heater is not suitable for connection to a 30A ring circuit.

Do not position the heater under windows where curtains can contact the heater casing.

WARNING - THE SURFACES ON THIS HEATER CAN BE HOT.

This heater meets EN60-335 safety requirements. However, any heater type becomes hot in normal

operation. Care must be taken to ensure that prolonged skin contact with the heater does not occur.

WHERE YOUNG CHILDREN, INFIRM PERSONS, OR THE AGED ARE PRESENT THIS APPLIANCE

MUST BE ADEQUATELY GUARDED. Contact your installer or the manufacturer for further advice.

This appliance is very heavy and must be securely fixed to a wall. DO NOT UNDER ANY

CIRCUMSTANCES ATTEMPT TO MOVE OR REPOSITION THIS HEATER WITHOUT SEEKING

EXPERT ADVICE.

IMPORTANT - Due to the newness of materials the heater will produce a slight smell for the first few days

of operation. ROOMS MUST BE WELL VENTILATED AND YOUNG CHILDREN, CAGED BIRDS, OR

PERSONS WITH RESPIRATORY COMPLAINTS MUST NOT REMAIN IN CLOSE PROXIMITY TO THE

HEATER DURING THE FIRST 48 HOURS OF THE COMMISSIONING PERIOD.

IF, DURING ANY REASSEMBLY OF THE HEATER, A PART OF THE THERMAL INSULATION SHOWS

DAMAGE OR DETERIORATION WHICH MAY IMPAIR SAFETY, IT SHOULD BE REPLACED BY AN

IDENTICAL PART.

IPX2

1 2 3 4

Inhaltsverzeichnis

Seite 1 - XLS6N AUTOMATIC XL6N MANUAL

XLS6N AUTOMATIC XL6N MANUALULTRA-SLIM STORAGE HEATERMODELS: XLS6N - 6kWhXL6N - 6kWhINSTALLATION AND OPERATINGINSTRUCTIONSIMPORTANTPLEASE READ THIS L

Seite 2 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONSPREPARATIONThe heater will arrive separately from itsstorage bricks, 4 bricks will be required.(2 Packs) Catalogue No. XT8300

Seite 3

THE FOLLOWING MUST BE APPLIED WHENFIXING THE HEATER TO THE WALL BRACKET7.7.i) If no skirting board is present secure the heater throughthe wall bracke

Seite 4 - OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONSSAFETY INSTRUCTIONS1. Ventilate rooms well during commissioning2. Do not move the heater in any way once installedwithout the se