Dimplex QM125 Betriebsanleitung PDF herunterladen (Seite 6)

- 6 -

Installing the Heater

The heater must be securely ﬁ xed to a wall. Screws

with suitable wall ﬁ xings for solid walls are provided.

If other walls types are encountered it is the installer

who must choose the most suitable ﬁ xing.

SUGGESTED FIXINGS

SOLID BRICK/BLOCK: No. 10 size plastic inserts,

8mm drill bit. Drill hole 15mm deeper than plastic

insert length.

PLASTERBOARD - If possible locate studding and

use No. 10 woodscrews directly into the wood,

otherwise M5 rawlplug intersets are suitable.

NOTE: FOR OTHER WALL TYPES (eg. timber

frame and hollow concrete) SEEK SPECIALIST

ADVICE.

If the ﬂ oor is carpeted then the carpet should be slit

and underlay cut away to allow the feet to rest ﬁ rmly

on the ﬂ oor. Carpet gripper must be locally removed

so that the feet may rest in a level position.

This appliance is heavy. The ﬂ oor must be checked

to ensure that it is capable of bearing the weight of

the unit, up to 165kg.

DO NOT UNDER ANY CIRCUMSTANCES

ATTEMPT TO MOVE OR REPOSITION THIS

HEATER WITHOUT SEEKING EXPERT ADVICE.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Keine Kommentare

Dimplex QM125 Betriebsanleitung Seite 6