Dimplex LAGFB2 Betriebsanweisung

Stöbern Sie online oder laden Sie Betriebsanweisung nach Kamine Dimplex LAGFB2 herunter. Dimplex LAGFB2 User`s guide Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 11
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
LAGUNA FIREBOX
LAGFB2
08/51849/0 ISS1
UK
Seitenansicht 0
1 2 3 4 5 6 ... 10 11

Inhaltsverzeichnis

Seite 1 - LAGUNA FIREBOX

LAGUNA FIREBOXLAGFB2 08/51849/0 ISS1UK

Seite 2 - CONTENTS

8After Sales ServiceYour product is guaranteed for one year from the date of purchase.Within this period, we undertake to repair or exchange this prod

Seite 3 - IMPORTANT INSTRUCTIONS

1. Warranty Card2. GuaranteePeriod (in Years)3. Model(s)4. Date of Purchase5. Stamp & Signature of retailer6. Fault/Defect7. Contact Number &

Seite 4

QUICK REFERENCE GUIDE 1. Prior to the fi rst use of the fi rebox verify the following: • Are the circuit breakers for the fi rebox on? • Are the lig

Seite 5 - FIREBOX INSTALLATION

IMPORTANT INSTRUCTIONSPLEASE RETAIN THIS USER’S GUIDE FOR FUTURE REFERENCEWhen using electrical appliances, basic precautions should always be followe

Seite 6 - OPERATION

2NOTE: Procedures and techniques that are considered important enough to emphasize.CAUTION: Procedures and techniques which, if not carefully follo

Seite 7

NOTE A 13amp, 230VAC circuit is required. A dedicated circuit is preferred but not essential in all cases. A dedicated circuit will be required if,

Seite 8 - MAINTENANCE

4 4. Use studs to frame an opening of 775mm wide X 658mm high X 300mm deep. The power cord can be routed from behind the trim and along the wall to

Seite 9

5 Level 1: The fl ame effect is turned on and the fi rst red indicator light is activated. Level 2: The fl ame effect remains on, and the Purifi reT

Seite 10 - After Sales Service

6MAINTENANCELIGHT BULB REPLACEMENTAllow at least 5 minutes for light bulbs to cool before touching bulbs to avoid accidental burning of skin.Light b

Seite 11

7 7. Unscrew bulbs counter clockwise. 8. Insert new bulbs. 9. Re-install upper light panel. 10. Slide front glass back into position and attach

Kommentare zu diesen Handbüchern

Keine Kommentare