Dimplex VCX1525 Bedienungshandbuch PDF herunterladen (Seite 17)

17

Figure 12

Lift to

remove

Glass

assembly

Maintenance

Figure 13

Light

Block

remove (Figure 11).

4. Remove the two screws

securing the light block as

shown in Figure 13, then re-

move the light block.

5. Reach in and turn the burnt

bulb(s) counterclockwise to

remove.

6. Replace with new bulbs.

7. Reassemble light block and

glass assembly in reverse

order.

Glass Cleaning

The front glass is cleaned in the

factory during the assembly oper-

ation. During shipment, installa-

tion, handling, etc., the front glass

may collect dust particles, these

can be removed by dusting lightly

with a clean dry cloth.

To remove ngerprints or other

marks, the glass can be cleaned

with a damp cloth. The glass

should be completely dried with

a lint free cloth to prevent water

spots. To prevent scratching,

do not use abrasive cleaners or

spray liquids on the glass surface.

Fireplace Surface Cleaning

To remove ngerprints or other

marks, the exterior nish can be

cleaned with a damp cloth with

a mild detergent. The surface

should be completely dried with

a lint free cloth to prevent water

spots. To prevent scratching,

do not use abrasive cleaners or

spray liquids on any surface.

Servicing

Except for light bulb replacement

and cleaning described above, an

authorized service representative

should perform any other servicing.

1 2 ... 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare