Dimplex Rough RTOPSTV20GR Installationsanleitung

WOOD FIRE INSTALLATION GUIDE WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury o

10 FIREPLACE INSERT MODELS NOTE. The following instructions cover the installation of any insert heater into a sound masonry fireplace, which has

11 • In NEW ZEALAND:- The LE 4000 Provincials can be installed in a masonry fireplace even though the fireplace has not be

12 Check the distance back from the face of the surround to the centre of chimney to determine whether the flue will require an offset fitting. If n

2 THE INSTALLATION INSTRUCTIONS IN THIS MANUAL APPLY TO WOODFIRESMADE BY GDA LTD:- (Softwood and Hardwood refer to the fuel used for emission test

3 CONTENTS ALL MODELS INTRODUCTION 4 FREE STANDING MODELS - INSTALLATION UNPACKING 5 ASSEMBLY 5 POSITIONING OF HEATER 5 FLOOR

4 INTRODUCTION In the interests of your safety, most building regulatory Authorities in Australia and New Zealand require any wood fire installation

5 FREESTANDING MODELS UNPACKING After removal of the shipping carton or wooden crate, open the door and lift it from its hinges and keep it in safe

6 FLOOR PROTECTOR (Hearth) REQUIREMENTS — Freestanding models Unless your wood fire will be standing on an un-covered fireproof floor (containing n

7 INSTALLING THE FLUE You MUST use a flue system, which is tested and complies with the current installation Standard AS/NZS 2918:2001 Appendix F.

8 FIXING THE WOODFIRE IN POSITION Once the flue shielding system has been installed through the ceiling and roof, the wood fire can be placed in it

9 FINAL ASSEMBLY Before using the wood fire, confirm that the internal firebox components are in their correct positions. (See ‘FIREBOX LINERS” in